72401L10SO8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 10MHz |
| Access Time | 55 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 100 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72401L10SO8 Overview
FIFO memory chip can be found in the SOIC package.Tape & Reel case is used for packaging.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 16 terminations.There are 16 pins on the operation pins.The maximum current required for its operation is 35mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.Keeping the temperature at 0°C degrees Celsius ensures its reliability.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 16 pins in total.Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate FALL THRU 65NS .A clock running at frequency 10MHz is used by the FIFO memory IC.
72401L10SO8 Features
FIFOs category
Clock frequency of 10MHz
72401L10SO8 Applications
There are a lot of Integrated Device Technology (IDT) 72401L10SO8 FIFOs Memory applications.
- TVs
- Game Consoles
- Firmware loaders
- Computers
- Video
- Signal processing
- Tape controllers
- Test Equipment
- Networking
- PC peripheral