723651L15PF
| Parameters | |
|---|---|
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 66.7MHz |
| Access Time | 11 ns |
| Data Bus Width | 36b |
| Organization | 2KX36 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
723651L15PF Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 120 .In the case of the operation pins, they are 120 pins.The maximum current required for its operation is 400μA .In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 120 pins on this board.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.Additionally, this FIFO memory can be used to generate MAIL BOX; RETRANSMIT .
723651L15PF Features
FIFOs category
Frequency at most
723651L15PF Applications
There are a lot of Integrated Device Technology (IDT) 723651L15PF FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Industrial Systems
- Network bridges
- Game Controller
- Communications
- Consumer Systems
- Tape controllers
- Fabrication Site
- General Data Collection Applications at Extreme High-Temperatures
- Routers