72291L10PF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72291L10PF Overview
FIFO memory chip can be found in the TQFP package.A Surface Mount mounting method is recommended.With a supply voltage of 5V volts, high efficiency is possible.The number of terminations in FIFO means is 64 .64 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 64 pins are present on the FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normally, the component owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.
72291L10PF Features
FIFOs category
Frequency at most
72291L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72291L10PF FIFOs Memory applications.
- Network switching/routing
- Buses
- Extended product-change notification
- Routers
- Product traceability
- General Data Collection Applications at Low-Temperatures
- Consumer
- Network bridges
- SPD for DDR3 Memory Modules
- Communications