72275L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72275L10TF8 Overview
LQFP is the package in which FIFO memory chip is contained.In terms of packaging, it comes in Tape & Reel cases.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.64 pins are the operation pins.For its operation, 90mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 100MHz .Normally, the FIFO memory's maximum value is 100MHz .In normal circumstances, the component has 5V power supplies.With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72275L10TF8 Features
FIFOs category
Frequency at most
72275L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72275L10TF8 FIFOs Memory applications.
- Extended product life cycle
- Queues for communication systems
- Laser Receiver System
- Application that requires re-writable nonvolatile parameter memory
- Network bridges
- Emulators
- Network switching/routing
- Telecommunication
- Tape controllers
- Portable Information Devices