72245LB25PF8
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
72245LB25PF8 Overview
The TQFP package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.64 terminations are contained in FIFO means.FIFO design has 64 operation pins.FIFO design requires a maximum current of 60mA to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 64 pins are attached to it.When the frequency is set to 40MHz it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .Normally, the component owns 5V power supplies.
72245LB25PF8 Features
FIFOs category
Frequency at most
72245LB25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25PF8 FIFOs Memory applications.
- Digital buffering
- Analog-to-digital converters
- Programmable Logic Controller
- TVs
- Computer networks
- Disk Controllers
- Product traceability
- SPI Bus Flash Memory Devices
- Battery Charger
- Microprogramming