72245LB10J8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB10J8 Overview
PLCC is the package in which FIFO memory chip is contained.Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 68 .These are the 68 pins for operation.FIFO requires a minimum of 60mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Currently, it has 68 pins.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normally, 5V power supplies are owned by the component.
72245LB10J8 Features
FIFOs category
Frequency at most
72245LB10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10J8 FIFOs Memory applications.
- Event Recorder
- Portable Information Devices
- Medical Monitoring Device
- Address mapping
- Game Consoles
- High-speed graphics pixel buffer
- A/D output buffers
- Emulators
- Network switching/routing
- Microprogramming