72240L10TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 100MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX8 |
| Density | 32 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 8b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72240L10TP Overview
The PDIP package contains FIFO memory chip.Mounting it Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 28 terminations.FIFO design has 28 operation pins.There is a maximum current requirement of 40mA for its operation.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.The FIFO memory IC has a total of 28 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .It is normal for a component to be equipped with 5V power supplies.
72240L10TP Features
FIFOs category
Frequency at most
72240L10TP Applications
There are a lot of Integrated Device Technology (IDT) 72240L10TP FIFOs Memory applications.
- Portable Information Devices
- Disk Controllers
- Data-acquisition systems
- Laser Receiver System
- Network switching/routing
- Alarm System
- Event Recorder
- Consumer Systems
- Microprogramming
- Optical memories