72235LB15TFGI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72235LB15TFGI Overview
You will find FIFO memory chip in the LQFP package.The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.There is a maximum current requirement of 60mA for its operation.A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this FIFO memory IC.There is 66.7MHz FIFO memory IC's maximum value for regular operation.A component normally has 5V power supplies attached to it.
72235LB15TFGI Features
FIFOs category
Frequency at most
72235LB15TFGI Applications
There are a lot of Integrated Device Technology (IDT) 72235LB15TFGI FIFOs Memory applications.
- Fabrication Site
- Disk Controllers
- Consumer
- Video Processing
- Industrial Systems
- Code converters
- Measurement Equipment
- Extended product-change notification
- MP3 Interface for Automobile
- Rate buffers