72235LB15JI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB15JI Overview
FIFO memory chip is included in the PLCC package.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 68 terminations.68 pins are the operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 68 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72235LB15JI Features
FIFOs category
Frequency at most
72235LB15JI Applications
There are a lot of Integrated Device Technology (IDT) 72235LB15JI FIFOs Memory applications.
- Firmware loaders
- Transistors
- Portable Information Devices
- General Data Collection Applications at Extreme High-Temperatures
- Seismic Data Collection at Extreme Temperatures
- Down-Hole Energy Drilling
- Cardiac Monitoring Device
- Queues for communication systems
- SPD for DDR3 Memory Modules
- TVs