72220L10TPG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 40mA |
| Clock Frequency | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX8 |
| Standby Current-Max | 0.005A |
| Memory Density | 8192 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72220L10TPG Overview
This package is included in DIP .A Through Hole mounting method is recommended.High efficiency is possible with a supply voltage of 5V .FIFO means contains 28 terminations.FIFO design has 28 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.A total of 28 pins are present on the FIFO memory IC.It is normal for the component to own 5V power supplies.As a result, Vsup is set at 5.5V (FIFO memory IC's maximum voltage supply).To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).The FIFO memory IC runs at a frequency of 100MHz .
72220L10TPG Features
FIFOs category
Clock frequency of 100MHz
72220L10TPG Applications
There are a lot of Integrated Device Technology (IDT) 72220L10TPG FIFOs Memory applications.
- Disk Controllers
- Microprogramming
- Multi-stage synchronizer
- Network bridges
- Network switching/routing
- Communications Systems
- Digital buffering
- Thermal Management for DDR3 Memory Modules
- Cardiac Monitoring Device
- IP Camera Buffer