72215LB25J
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 18b |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB25J Overview
You can find FIFO memory chip in the PLCC package.A memory of 1.1kB is available for storing applications and data on this FIFO chip.Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.A total of 68 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 68 pins.In order to operate FIFO design, a maximum current of 60mA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Approximately 68 pins are attached to it.With a frequency of 40MHz , it exhibits good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.The 1 circuit is used in order to enhance its flexibility.
72215LB25J Features
1.1kB memory size
FIFOs category
Frequency at most
72215LB25J Applications
There are a lot of Integrated Device Technology (IDT) 72215LB25J FIFOs Memory applications.
- Magnetic memories
- Video Processing
- TVs
- Cameras
- Data
- Optical memories
- Wireless
- Network bridges
- General Data Collection Applications at Low-Temperatures
- Extended product life cycle