| Parameters |
| Factory Lead Time |
7 Weeks |
| Contact Plating |
Lead, Tin |
| Mount |
Surface Mount |
| Package / Case |
TQFP |
| Number of Pins |
32 |
| Published |
2005 |
| Part Status |
Active |
| Max Operating Temperature |
70°C |
| Min Operating Temperature |
0°C |
| Frequency |
40MHz |
| Operating Supply Voltage |
5V |
| Max Supply Voltage |
5.5V |
| Min Supply Voltage |
4.5V |
| Element Configuration |
Dual |
| Nominal Supply Current |
35mA |
| Max Supply Current |
35mA |
| Frequency (Max) |
40MHz |
| Access Time |
15 ns |
| Direction |
Unidirectional |
| Density |
2.3 kb |
| Sync/Async |
Synchronous |
| Word Size |
9b |
| Bus Directional |
Unidirectional |
| Retransmit Capability |
No |
| FWFT Support |
No |
| Programmable Flags Support |
Yes |
| Length |
7mm |
| Width |
7mm |
| Thickness |
1.4mm |
| RoHS Status |
RoHS Compliant |
| Lead Free |
Contains Lead |
72201L25PF Overview
The TQFP package contains FIFO memory chip.Surface Mount is recommended as the mounting method.32 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It maintains good accuracy at a 40MHz frequency.Normally, the FIFO memory's maximum value is 40MHz .
72201L25PF Features
Frequency at most
72201L25PF Applications
There are a lot of Integrated Device Technology (IDT) 72201L25PF FIFOs Memory applications.
- Rate buffers
- Test Equipment
- Network switching/routing
- Product traceability
- Computer networks
- Signal processing
- Measurement Equipment
- Thermal Management for DDR3 Memory Modules
- Temporary storage elements
- Notebook