7208L35J
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 22.2MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 64KX9 |
| Density | 576 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7208L35J Overview
This package is included in PLCC .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO consists of 32 terminations, which indicates that FIFO means is empty.These are the 32 pins for operation.FIFO requires a minimum of 120mA current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Currently, it has 32 pins.Normally, the FIFO memory's maximum value is 22.2MHz .A component normally has 5V power supplies attached to it.Additionally, this FIFO memory can be used to generate RETRANSMIT .The 2 circuit is used in order to enhance its flexibility.
7208L35J Features
FIFOs category
Frequency at most
7208L35J Applications
There are a lot of Integrated Device Technology (IDT) 7208L35J FIFOs Memory applications.
- Switches
- Video
- General Data Collection Applications at Low-Temperatures
- TVs
- GPS Offender Tracking
- SPD for DDR3 Memory Modules
- Event Recorder
- Queues for communication systems
- Extended product-change notification
- Video Processing