Parameters |
Factory Lead Time |
7 Weeks |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
32 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
120mA |
Max Supply Current |
120mA |
Clock Frequency |
28.5MHz |
Access Time |
25 ns |
Organization |
64KX9 |
Density |
576 kb |
Standby Current-Max |
0.012A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
35 ns |
Height Seated (Max) |
3.55mm |
Length |
13.97mm |
Width |
11.43mm |
Thickness |
2.79mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
7208L25JI8 Overview
PLCC is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.There are 32 pins on the operation pins.FIFO requires a minimum of 120mA current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.It is normal for the component to own 5V power supplies.In this FIFO memory IC, the clock runs at frequency 28.5MHz .
7208L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
7208L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7208L25JI8 FIFOs Memory applications.
- Computers
- Extended product-change notification
- Smart Meter
- Fabrication Site
- Transistors
- Multi-stage synchronizer
- One assembly
- Disk Controllers
- Networking
- Temporary storage elements