7206L50P
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L50P Overview
FIFO memory chip is included in the PDIP package.There's a Bulk on the package.The recommended mounting way is Through Hole .When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations can be found in FIFO means.The operation pins are 28 pins.In order for FIFO design to operate, a maximum current of 120mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It has a total of 28 pins on it.It is normal for a component to be equipped with 5V power supplies.This gadget can also generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 15MHz .
7206L50P Features
FIFOs category
Clock frequency of 15MHz
7206L50P Applications
There are a lot of Integrated Device Technology (IDT) 7206L50P FIFOs Memory applications.
- Disk Controllers
- MP3 Interface for Automobile
- Extended product-change notification
- Programmable Logic Controller
- Extended product life cycle
- Product traceability
- Seismic Data Collection at Extreme Temperatures
- PC peripheral
- Test Equipment
- Video time base correction