7205L20J8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L20J8 Overview
You can find FIFO memory chip in the PLCC package.Surface Mount is recommended as the mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 32 terminations.Operation pins are 32 .There is a maximum current requirement of 120mA for its operation.A 5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.As a result, it contains a total of 32 pins.Normally, the component owns 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.In this FIFO memory IC, the clock runs at frequency 33.3MHz .
7205L20J8 Features
FIFOs category
Clock frequency of 33.3MHz
7205L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 7205L20J8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Battery Charger
- Look-up Tables
- Switches
- General Data Collection Applications at Extreme High-Temperatures
- Controlled baseline
- Laser Receiver System
- Telecommunication
- Computers
- Wireless