7205L12JG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7205L12JG8 Overview
FIFO memory chip is included in the PLCC package.Mounting it in the Surface Mount way is recommended.Supply voltages of 5V are capable of achieving high efficiency.In FIFO means, there are 32 terminations.Operation pins are 32 .FIFO design requires 120mA amps of current to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.It consists of a total of 32 pins.Normally, the component owns 5V power supplies.The gadget can also generate a value of RETRANSMIT .There is 50MHz frequency set for the clock of the FIFO memory IC.
7205L12JG8 Features
FIFOs category
Clock frequency of 50MHz
7205L12JG8 Applications
There are a lot of Integrated Device Technology (IDT) 7205L12JG8 FIFOs Memory applications.
- Measurement Equipment
- SPI Bus Flash Memory Devices
- PC peripheral
- Data-acquisition systems
- Data
- Cameras
- Alarm System
- TVs
- Networking
- SPI Bus Flash Memory Device