7204L20TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L20TP Overview
FIFO memory chip can be found in the PDIP package.There's a Bulk on the package.Through Hole is recommended as the mounting method.A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 28 terminations.28 pins are used for operation.FIFO design requires a maximum current of 120mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 28 pins.Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 33.3MHz .
7204L20TP Features
FIFOs category
Clock frequency of 33.3MHz
7204L20TP Applications
There are a lot of Integrated Device Technology (IDT) 7204L20TP FIFOs Memory applications.
- Game Consoles
- Desktop Computers
- Address mapping
- IP Camera Buffer
- Event Recorder
- MP3 Interface for Automobile
- Controlled baseline
- Measurement Equipment
- Portable Information Devices
- IP Radio