7200L35J8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L35J8 Overview
The PLCC package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V is capable of producing high efficiency.As a result of this, FIFO means contains 32 terminations.Operation pins are 32 .In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 32 pins are attached to it.It is normal for a component to be equipped with 5V power supplies.This gadget can also generate RETRANSMIT .This FIFO memory IC has a clock frequency of 22.2MHz .
7200L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
7200L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L35J8 FIFOs Memory applications.
- Disk Controllers
- Video Processing
- TVs
- Extended product-change notification
- Extended product life cycle
- Portable Information Devices
- Laser Receiver System
- Analog-to-digital converters
- Signal processing
- Buses