7200L30TDB
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L30TDB Overview
FIFO memory chip can be found in the CDIP package.The package comes in a case of Bulk .Mounting it in Through Hole is recommended.A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 28 terminations.As far as the operation pins are concerned, they are 28 pins.In order to operate it, it requires 100mA volts of current.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.It operates at -55°C degrees Celsius to ensure reliability.An operating temperature of 125°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 28 pins.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.A clock on the FIFO memory IC runs at a frequency of 25MHz .
7200L30TDB Features
FIFOs category
Clock frequency of 25MHz
7200L30TDB Applications
There are a lot of Integrated Device Technology (IDT) 7200L30TDB FIFOs Memory applications.
- Extended product-change notification
- Medical Monitoring Device
- Test Equipment
- Battery Charger
- Down-Hole Energy Drilling
- Application that requires re-writable nonvolatile parameter memory
- Multi-stage synchronizer
- Microprogramming
- SPI Bus Flash Memory Device
- Network switching/routing