71M6543H-IGTR/F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Single Converter Technology® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, UART |
| Memory Size | 64kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Number of I/O | 51 |
| RAM Size | 5kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 8.7mA |
| Max Frequency | 5MHz |
| Meter Type | 3 Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
71M6543H-IGTR/F Overview
It was packaged in Tape & Reel (TR). It is packaged in the 100-LQFP format. An example of its use as a 3 Phase meter would be the following. We have it in Surface Mount. It is possible to achieve higher operational temperatures at -40°C~85°C. There is a 3V~3.6V power supply used in this device. In its low-level I/O ports, this PMIC has a voltage of 0.8V. There is a voltage 2V on this device for high-level I/Os. 100 terminations are included in the part. An analog ANALOG CIRCUIT IC with strong PMIC capabilities. A normal voltage will be needed for this part, which is 3.3V. This device may not be able to operate without a voltage of 3V or higher. As far as the maximum voltage that will be applied to the device is concerned, it should be kept below 3.6V. The 100 pins are joined together. For logic gate applications, this is a 100 solution. It comes with a Surface Mount device for easy mounting and dismounting. In this case, it is a Other Analog ICs, which represents a specialized need. A memory chip can only function properly with a voltage not exceeding 8.7mA. There are several Single Converter Technology? series models that include it. The device can be supplied using 3.3V. It can operate up to 5MHz Hz. This PMIC has a memory size 64kB which is incorporated into it. Memory FLASH is utilised by the PMIC.
71M6543H-IGTR/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6543H-IGTR/F Applications
There are a lot of Maxim Integrated 71M6543H-IGTR/F Energy Metering ICs applications.
- Subsystem Power Measurement
- PCs/servers
- Industrial Lighting Power Monitoring
- Intelligent Power Distribution Units
- General Purpose Energy Measurement
- Industrial Equipment
- Telecom Infrastructure
- Power monitoring/power budgeting
- Central office equipment
- Telecommunications and data communications equipment