71M6543H-IGT/F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | Single Converter Technology® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, UART |
| Memory Size | 64kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Number of I/O | 51 |
| RAM Size | 5kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 8.7mA |
| Max Frequency | 5MHz |
| Meter Type | 3 Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
71M6543H-IGT/F Overview
Tubeipped up in a box. It is packaged in the 100-LQFP format. Using it as a 3 Phase meter is possible. We have it in Surface Mount. The operational temperature at -40°C~85°C has been increased. There is a 3V~3.6V power supply used in this device. The low-level I/O ports on this PMIC have a voltage of 0.8V. High-level I/Os are represented by voltage 2V, while standard I/Os are displayed by voltage Y. The part includes 100 terminations. This PMIC ANALOG CIRCUITIC is powerful. The part requires a normal voltage of 3.3V. Users should be noted that this device requires 3V or higher voltage to start up. In order to keep the maximum voltage that goes to the device under 3.6V, the voltage should be kept as low as possible. In order to join them, 100 pins are used. For logic gate applications, this is a 100 solution. It is designed as a Surface Mount device for easy install and dismount. Specifically, this is a Other Analog ICs for specialized needs that needs to be taken care of. A memory chip must have a voltage no greater than 8.7mA to work properly. Several Single Converter Technology? series models have this feature included in them. 3.3V can be used to supply this device. The device has the capability of operating at frequencies up to 5MHz. This PMIC has a memory size 64kB which is incorporated into it. Memory FLASH is utilised by the PMIC.
71M6543H-IGT/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6543H-IGT/F Applications
There are a lot of Maxim Integrated 71M6543H-IGT/F Energy Metering ICs applications.
- Poly-phase energy meters of class 0.5S and class 1
- General Purpose Energy Measurement
- Intelligent Power Distribution Units
- Telecom Infrastructure
- Subsystem Power Measurement
- Central office equipment
- Industrial Lighting Power Monitoring
- Server Backplane Systems
- Base Station Power Distribution Systems
- PCs/servers