71M6541F-IGT/F
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2010 |
| Series | Single Converter Technology® |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 71M6541 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, UART |
| Memory Size | 64kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Number of I/O | 51 |
| RAM Size | 5kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 8.7mA |
| Max Frequency | 5MHz |
| Meter Type | Single Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
71M6541F-IGT/F Overview
Packing in Tray. It is packaged in the 64-LQFP format. Using it as a Single Phase meter is possible. Available in Surface Mount. There is a higher operating temperature at -40°C~85°C. It operates using 3V~3.6V power supply. If you're looking for similar parts, search 71M6541. It has a voltage of 0.8V for its low-level I/O ports in this PMIC. This device displays a voltage of 2V for high-level I/Os. Parts of the part have 64 terminations on them. An analog ANALOG CIRCUIT IC with strong PMIC capabilities. The normal voltage required for the part is 3.3V. In order to operate this device, it needs a voltage of 3V or higher. In order to prevent damage to the device, it is important to keep the maximum voltage below 3.6V. Joined 64 pins make up the frame. Application-specific 64 solution for logic gates. This is a Other Analog ICs for specialized needs. To function properly, the memory chip must operate at a voltage not greater than 8.7mA. It is part of Single Converter Technology? series. The device can be supplied with 3.3V. Frequency ranges from 5MHz to X. The PMIC in this case has a memory size 64kB embedded in it. FLASH memory is used by the PMIC.
71M6541F-IGT/F Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6541F-IGT/F Applications
There are a lot of Maxim Integrated 71M6541F-IGT/F Energy Metering ICs applications.
- Telecommunications and data communications equipment
- Industrial Equipment
- PCs/servers
- Central office equipment
- Server Backplane Systems
- Real-Time Measurement of Input Power for AC/DC Supplies
- General Purpose Energy Measurement
- Telecom Infrastructure
- Subsystem Power Measurement
- Poly-phase energy meters of class 0.5S and class 1