66AK2H12BAAWA24
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 1517-BBGA, FCBGA |
| Number of Pins | 1517 |
| Operating Temperature | -40°C~100°C TC |
| Packaging | Tray |
| Series | 66AK2Hx KeyStone Multicore |
| JESD-609 Code | e1 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Type | DSP+ARM® |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Frequency | 1.4GHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 66AK2H12 |
| Interface | EBI/EMI, Ethernet, DMA, I2C, Serial RapidIO, SPI, UART/USART, USB 3.0 |
| Max Supply Voltage | 1.8V |
| Min Supply Voltage | 950mV |
| Memory Size | 4MB |
| Speed | 1400 MHz |
| RAM Size | 6MB |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 0.85V 1.0V 1.35V 1.5V 1.8V 3.3V |
| Number of UART Channels | 2 |
| Number of Cores | 12 |
| Non-Volatile Memory | ROM (384kB) |
| Voltage - Core | Variable |
| On Chip Data RAM | 12.75MB |
| Clock Rate | 1.2GHz DSP, 1.4GHz ARM® |
| Height | 3.75mm |
| Length | 40mm |
| Width | 40mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
66AK2H12BAAWA24 Overview
In the 1517-BBGA, FCBGA package, it is a type of electronic component.A packaging way of Tray is provided.The fact that it belongs to the DSP+ARM? family means that it can be applied to a wide range of applications.The mounting of the device is done in the direction of Surface Mount.Keeping the device at the temperature of -40°C~100°C TC will ensure that it runs as it should.The analog voltage range of 0.85V 1.0V 1.35V 1.5V 1.8V 3.3V refers to the voltage that can be input or ouput.As part of the 66AK2Hx KeyStone Multicore series, this digital signal processor is included.The supply voltage is 1V.In its configuration, there are 1517 pins.Many related parts can be identified by using the 66AK2H12 part number as a base.It is specifically designed to operate with the frequency of 1.4GHz.A Surface Mount mounting method is used for its mounting.The minimum voltage supplied to this device is as low as 950mV.A maximum voltage of 1.8V can be provided to this device.This device is able to store 4MB data in its memory.The 2 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.ARM-architecture is used in this processor core.It is equipped with 12 cores.
66AK2H12BAAWA24 Features
Supplied in the 1517-BBGA, FCBGA package
12 cores
66AK2H12BAAWA24 Applications
There are a lot of Texas Instruments 66AK2H12BAAWA24 DSP applications.
- Medical imaging
- Audio signal
- Digital image processing
- Radar
- Compression of videos
- Radio detection and rangin systems
- Computer vision technology
- Instrument modeling
- Control systems
- Speech processing and recognition