5M80ZM64C5N
| Parameters | |
|---|---|
| Length | 4.5mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TFBGA |
| Number of Pins | 64 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN SILVER COPPER |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 118.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 25μA |
| Number of I/O | 30 |
| Nominal Supply Current | 25μA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 152MHz |
| Number of Logic Elements/Cells | 80 |
| Number of Programmable I/O | 30 |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
5M80ZM64C5N Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a TFBGA package containing it.There are 30 I/Os programmed in it.There are 64 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.BOTTOMis the terminal position of this electrical part.The power supply voltage is 1.8V.This part is part of the family [0].There are 64 pins on the chip.If this device is used, you will also be able to find [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 64 pins.It operates with the maximal supply voltage of 1.89V.Despite its minimal supply voltage of [0], it is capable of operating.There are 30 Programmable I/Os.There can be 118.3MHz frequency achieved.Operating temperatures should be higher than 0°C.Ideally, the operating temperature should be below 85°C.In total, it contains 8 logic blocks (LABs).In order to form a fundamental building block, there are 80logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices contain a 1kBmemory for storing data and programs.
5M80ZM64C5N Features
TFBGA package
30 I/Os
64 pin count
64 pins
8 logic blocks (LABs)
5M80ZM64C5N Applications
There are a lot of Altera 5M80ZM64C5N CPLDs applications.
- Storage Cards and Storage Racks
- Parity generators
- Wide Vin Industrial low power SMPS
- Boolean function generators
- Bootloaders for FPGAs
- DMA control
- Digital designs
- Programmable polarity
- D/T registers and latches
- I/O PORTS (MCU MODULE)