5962-8773802PA
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP77 |
| Pin Count | 8 |
| Qualification Status | Qualified |
| Number of Channels | 1 |
| Power Dissipation | 500mW |
| Quiescent Current | 2mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1.2nA |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Input Offset Voltage (Vos) | 10μV |
| Gain Bandwidth Product | 400 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 141.58dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| -3db Bandwidth | 600kHz |
| Bias Current-Max (IIB) @25C | 0.002μA |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Input Voltage Noise Density | 18nV/sqrt Hz |
| Height | 3.56mm |
| Length | 10.29mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-8773802PA Overview
There is a 8-CDIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 10μV for input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . There should be no change in the voltage gain at 141.58dB. Op amp ic has 1 channels. There is an 2mA quiescent current running through op amp ic.
5962-8773802PA Features
8 Pins
supply voltage of 15V
141.58dB voltage gain
5962-8773802PA Applications
There are a lot of Analog Devices Inc. 5962-8773802PA Instrumentational OP Amps applications.
- High gain DC amplifier
- Polarized electrodes
- ECG equipment
- Home audio systems
- Scintillation detectors
- Displayers for aircraft and air transportation control systems
- Voltage regulation circuit
- Signal amplification
- Portable media players
- Power generator