54FCT245ATDB
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 1mA |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 4.9 ns |
| High Level Output Current | 48mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT245ATDB Overview
Logical driver uses a neat CDIP package. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the FCT family's comprehensive benefits and features. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 1mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features WITH DIRECTION CONTROL to better serve the need. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 12mA to its low level. In high level output mode, the electronic parts may conduct 48mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS TRANSCEIVER logic IC.
54FCT245ATDB Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
High Level Output: 12mA
Low Level Output: 48mA
BUS TRANSCEIVER Logic IC
54FCT245ATDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT245ATDB Buffers & Transceivers applications.
- Pocket PC
- Carrier phase observations
- Long-distance fiber optic network applications
- Data center
- Shortwave receiver
- Single fiber bidirectional application
- Broadcast application
- 1x/2x Fiber Channel
- Transmission stations
- SONET/SDH Network