4SEPC820M+T
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Cut Tape (CT) |
| Series | OS-CON™, SEPC |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 4V |
| Capacitance | 820μF |
| Voltage - Rated DC | 4V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Lead Diameter | 600 μm |
| Voltage | 4V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 656μA |
| Ripple Current | 6.64A |
| Life (Hours) | 5000 hours |
| Ripple Current @ Low Frequency | 305mA @ 120Hz |
| Ripple Current @ High Frequency | 6.1A @ 100kHz |
| Dissipation Factor | 10 % |
| Diameter | 10mm |
| Height Seated (Max) | 0.512 13.00mm |
| Length | 13mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Cut Tape (CT) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 4SEPC820M+T capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 4SEPC820M+T is suitable to conduct the ripple current at 6.64A. 4SEPC820M+T Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. 4SEPC820M+T Capacitor. There are 656μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. Voltage - Rated often has values of 4V. The voltage for the part is specified as 4V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
OS-CON™, SEPC Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Cut Tape (CT)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 4SEPC820M+T Aluminum Polymer Capacitors.
Typically, 4SEPC820M+T is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- Voltage Doubling
- Coupling or blocking
- DC Buffering
- Spot Welding
- Computer motherboards
- To enhance power efficiency
- Lighting Ballast
- DC/DC, DC/AC, and AC/AC converters
- Smoothing Noise Filtering