4214BP
| Parameters | |
|---|---|
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | NOT SPECIFIED |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-CDIP-T14 |
| Function | Analog Multiplier/Divider |
| Qualification Status | COMMERCIAL |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -25°C |
| Supply Voltage-Max (Vsup) | 20V |
| Temperature Grade | OTHER |
| Supply Voltage-Min (Vsup) | 8.5V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Neg Supply Voltage-Min (Vsup) | -8.5V |
| Number of Bits/Stages | 4-Quadrant |
| Height Seated (Max) | 4.45mm |
| Length | 18.545mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
4214BP Overview
Tube are used for its packaging.Consequently, it is embedded in the 14-CDIP (0.300, 7.62mm) package to ensure cost-effectiveness.It is common to use 4-Quadrant bits per stage.In order to operate it, a voltage of 15V is applied.A nominal negative supply voltage is provided for -15V.Radio-frequency signals modulated at 10MHz occupy the frequency range of 10MHz.14 terminations have been designed to prevent reflections from the transmission line.ANALOG MULTIPLIER OR DIVIDER is an analog integrated circuit type.In this case, the maximum operating temperature is 85°C.A normal operation of the device requires a maximum supply voltage of 20V.At -25°C, a minimum operating temperature is allowed.
4214BP Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 10MHz
4214BP Applications
There are a lot of Rochester Electronics, LLC 4214BP Analog Multipliers & Dividers applications.
- Medical instruments
- Television
- Comparator
- Automatic control
- E-book readers
- single/dual op amp sum and difference circuits
- Hand-held batteries
- Band-pass filter
- Strain gauges
- Weighing systems