24LC512-I/SM
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 24LC512 |
| Pin Count | 8 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | 2-Wire, I2C, Serial |
| Memory Size | 512Kb 64K x 8 |
| Nominal Supply Current | 5mA |
| Memory Type | Non-Volatile |
| Clock Frequency | 400kHz |
| Access Time | 900ns |
| Memory Format | EEPROM |
| Memory Interface | I2C |
| Write Cycle Time - Word, Page | 5ms |
| Density | 512 kb |
| Standby Current-Max | 0.000001A |
| Serial Bus Type | I2C |
| Endurance | 1000000 Write/Erase Cycles |
| Write Cycle Time-Max (tWC) | 5ms |
| Data Retention Time-Min | 200 |
| Write Protection | HARDWARE |
| I2C Control Byte | 1010DDDR |
| Height | 1.88mm |
| Length | 5.21mm |
| Width | 5.28mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
24LC512-I/SM Overview
As far as its memory type goes, it falls into the Non-Volatile category. In addition, memory ics is available in a Tube case as well. The case is embedded in 8-SOIC (0.209, 5.30mm Width). There is 512Kb 64K x 8 of memory on the chip. EEPROM-format memory is used in this device, which is a mainstream design. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. With 2.5V~5.5V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. The chip has 8 terminations. The part supports at least 1 functions to ensure a comprehensive working process. A voltage of 4.5V is required for the operation of this memory device. In the memory, there is a clock frequency rotation that ranges 400kHz. A device's base part number, 24LC512, is often used in order to identify similar components. A 8-pin package containing this memory device is used to house this device. It has 8 pins indicating it has 8 memory locations. It is noted that the operating supply voltage of this memory is 2.5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. As far as the nominal supply current of this memory component is concerned, it is rated at 5mA. This memory chip requires only 3/5V of power. Integrated into this memory is a I2C-type serial bus that facilitates data transmission to the CPU.
24LC512-I/SM Features
Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins
Operating Supply Voltage:2.5V
24LC512-I/SM Applications
There are a lot of Microchip Technology 24LC512-I/SM Memory applications.
- servers
- nonvolatile BIOS memory
- printers
- graphics card
- hard disk drive (HDD)
- personal computers
- telecommunications
- workstations,
- data buffer
- supercomputers