24AA16T-I/OT
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | 1 MILLION ERASE/WRITE CYCLES |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 24AA16 |
| Pin Count | 5 |
| Supply Voltage-Min (Vsup) | 1.7V |
| Interface | 2-Wire, I2C, Serial |
| Memory Size | 16Kb 2K x 8 |
| Nominal Supply Current | 3mA |
| Memory Type | Non-Volatile |
| Clock Frequency | 400kHz |
| Access Time | 900ns |
| Memory Format | EEPROM |
| Memory Interface | I2C |
| Organization | 2KX8 |
| Write Cycle Time - Word, Page | 5ms |
| Density | 16 kb |
| Standby Current-Max | 0.000001A |
| Serial Bus Type | I2C |
| Endurance | 1000000 Write/Erase Cycles |
| Data Retention Time-Min | 200 |
| Write Protection | HARDWARE |
| I2C Control Byte | 1010MMMR |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
24AA16T-I/OT Overview
A Non-Volatile-type memory can be classified as the memory type of this device. It is supplied votage within Tape & Reel (TR). There is a SC-74A, SOT-753 case embedded in it. There is an 16Kb 2K x 8 memory capacity on the chip. There is a mainstream memory format used by this device, which is called EEPROM-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. The supply voltage can be up to 1.7V~5.5V. The recommended mounting type for memory ics is Surface Mount. The chip is terminated with 5 terminations. The comprehensive working procedure of this part involves 1 functions. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. The memory has a clock frequency rotation within 400kHz. 24AA16, as the device's base part number, is frequently referred in order to select similar parts. In this ic memory chip, there is an 5-pin package that encloses the device. The memory device in question has 5 pins, thus indicating that it has 5 memory locations that can be accessed. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. It is rated for a nominal supply current of 3mA for this memory component. Despite all its merits, this chip also features 1 MILLION ERASE/WRITE CYCLES to boost system performance. Its I2C-type serial bus helps transfer data to the CPU efficiently.
24AA16T-I/OT Features
Package / Case: SC-74A, SOT-753
5 Pins
Additional Feature:1 MILLION ERASE/WRITE CYCLES
24AA16T-I/OT Applications
There are a lot of Microchip Technology 24AA16T-I/OT Memory applications.
- hard disk drive (HDD)
- networking
- eSRAM
- cell phones
- mainframes
- Camcorders
- data buffer
- graphics card
- workstations,
- supercomputers