24AA08-I/SN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Additional Feature | 2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 24AA08 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Interface | 2-Wire, I2C, Serial |
| Memory Size | 8Kb 256 x 8 x 4 |
| Nominal Supply Current | 3mA |
| Memory Type | Non-Volatile |
| Clock Frequency | 400kHz |
| Access Time | 900ns |
| Memory Format | EEPROM |
| Memory Interface | I2C |
| Write Cycle Time - Word, Page | 5ms |
| Density | 8 kb |
| Standby Current-Max | 0.000001A |
| Serial Bus Type | I2C |
| Endurance | 1000000 Write/Erase Cycles |
| Write Cycle Time-Max (tWC) | 5ms |
| Data Retention Time-Min | 200 |
| Write Protection | HARDWARE |
| I2C Control Byte | 1010XMMR |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
24AA08-I/SN Overview
A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. As you can see, it is embedded in 8-SOIC (0.154, 3.90mm Width) case. The chip has an 8Kb 256 x 8 x 4 memory. This device uses takes advantage of the EEPROM format. -40°C~85°C TA is an extended operating temperature range, making this device ideal for demanding applications. A supply voltage of 1.7V~5.5V can be applied to it. It is recommended that the mounting type be Surface Mount. A total of 8 terminations have been planted on the chip. In total, 1 functions are supported by this part. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. In order to operate effectively, the memory rotates at a clock frequency within a range of 400kHz. As the base part number for the device, 24AA08 is frequently used to select similar items. An 8-pin package is used to package this memory device. There are 8 pins on this memory device, which indicates it has 8 memory locations in it. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. The nominal supply current of this memory component is 3mA. This chip features all the merits of a conventional chip, but it also features 2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED to improve system performance. There is only a single power supply required for this memory chip. The I2C-type serial bus this memory integrates with is helpful for transferring data to the CPU.
24AA08-I/SN Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Additional Feature:2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED
24AA08-I/SN Applications
There are a lot of Microchip Technology 24AA08-I/SN Memory applications.
- graphics card
- data buffer
- personal computers
- multimedia computers
- cell phones
- nonvolatile BIOS memory
- DVD disk buffer
- servers
- printers
- supercomputers