20SEP56M+T

20SEP56M+T

OS-CON™, SEP Series 56μF 20V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB)


  • Manufacturer: Panasonic Electronic Components
  • Origchip NO: 590-20SEP56M+T
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 606
  • Description: OS-CON™, SEP Series 56μF 20V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Tape & Box (TB) (Kg)

Details

Tags

Parameters
Factory Lead Time 10 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Operating Temperature -55°C~105°C
Packaging Tape & Box (TB)
Series OS-CON™, SEP
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) Not Applicable
Termination Radial
Type Polymer
Max Operating Temperature 105°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 20V
Capacitance 56μF
Voltage - Rated DC 20V
Lead Pitch 5mm
ESR (Equivalent Series Resistance) 40mOhm
Lead Spacing 0.197 5.00mm
Lead Diameter 500 μm
Lifetime @ Temp 3000 Hrs @ 105°C
Leakage Current 224μA
Ripple Current 2.4A
Life (Hours) 3000 hours
Ripple Current @ Low Frequency 120mA @ 120Hz
Ripple Current @ High Frequency 2.4A @ 100kHz
Dissipation Factor 12 %
Diameter 10mm
Height Seated (Max) 0.315 8.00mm
Length 8mm
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 56μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEP series. This part is mounted in the way of Through Hole. The type of the 20SEP56M+T capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 20SEP56M+T is suitable to conduct the ripple current at 2.4A. 20SEP56M+T Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 20V. 20SEP56M+T Capacitor. There are 224μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. Voltage - Rated often has values of 20V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.

OS-CON™, SEP Series


Capacitance: 56μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of 20SEP56M+T Aluminum Polymer Capacitors.


Typically, 20SEP56M+T is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Voltage Doubling
  • Smoothing Noise Filtering
  • Spot Welding
  • Computer motherboards
  • Flashtube Ignition
  • To enhance power efficiency
  • Bypassing Noise Filtering
  • Audio Crossover
  • Signal decoupling & power bypass
  • DC Link

Write a review

Note: HTML is not translated!
    Bad           Good