1P1G66QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 25Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | 1G66Q |
| Output | COMMON OUTPUT |
| Pin Count | 5 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Propagation Delay | 2.6 ns |
| Turn On Delay Time | 14 ns |
| Supply Type | Single |
| Bandwidth | 195MHz |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 7.2ns, 6.9ns |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 8.9ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
1P1G66QDBVRQ1 Overview
Shipping overseas is convenient with the electronic component packed in SC-74A, SOT-753. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. A total of 5 terminations have been recorded. A 1 channel electronic part produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. An injection of 5 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the 1G66Q search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 25Ohm. The datasheets for the 5 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.65V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. A voltage higher than 10μA may cause damage to the switch multiplexer. A total of COMMON OUTPUT outputs are available on this analog switch ic. It is possible to transfer data over a 195MHz-bandwidth. The Automotive, AEC-Q100 series is responsible for it.
1P1G66QDBVRQ1 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 195MHz
1P1G66QDBVRQ1 Applications
There are a lot of Texas Instruments 1P1G66QDBVRQ1 Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Precision data acquisition
- Wireless Local Loop
- Relay Replacement
- Cross Connects
- PDAs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PDH Multiplexers
- DSUs
- E1 Network Equipment