1P1G3157QDCKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | 1G3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 10μA |
| Number of Bits | 2 |
| Propagation Delay | 300 ps |
| Turn On Delay Time | 24 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 13 ns |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Low Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Channel Capacitance (CS(off), CD(off)) | 5.2pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 15Ohm |
| Normal Position | NC |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
1P1G3157QDCKRQ1 Overview
As the electronic part is packed in 6-TSSOP, SC-88, SOT-363, international shipping is convenient. Advanced packaging method Cut Tape (CT) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 2.3V voltage supply. An electrical component like this is included in the 6 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Use 1G3157 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 15Ohm. For details about the functions of 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. This digital switch can be operated with a current of 1μA. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 10μA, damage can occur. In order to operate the 1 inputs, there are several steps to follow. There are various bandwidths available for data transfer. Drain to Source resistance for this electronic component is 15Ohm. The analog switch ics includes 2 outputs. 2-bit conductivity is possible. The Automotive, AEC-Q100 series includes it.
1P1G3157QDCKRQ1 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 15Ohm
2-Bit
1P1G3157QDCKRQ1 Applications
There are a lot of Texas Instruments 1P1G3157QDCKRQ1 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Remote Powered Equipment
- Avionics
- Automotive applications
- Fiber to the Home
- Automatic test equipment
- USB 1.1 signal switching circuits
- PBX interfaces
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Microwave transmission systems