1P1G3157QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | 1G3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 10μA |
| Number of Bits | 2 |
| Propagation Delay | 300 ps |
| Turn On Delay Time | 24 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 13 ns |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Low Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Channel Capacitance (CS(off), CD(off)) | 5.2pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 15Ohm |
| Normal Position | NC |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
1P1G3157QDBVRQ1 Overview
This electronic part is conveniently packaged in SOT-23-6, making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~125°C TA. There are 6 terminations totally. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.3V voltage supply. Electronic part bodies are injected with 6 pins. A SPDT switching circuit is used for these analog switches. Look for analog switch ic variants by searching with 1G3157. It has an internal resistance of 15Ohm. The datasheets for the 6 pins explain the functions. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. In order to operate this switch device, it would need a current of 1μA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A voltage higher than 10μA may cause damage to the switch multiplexer. There are 1 inputs to be operated. 300MHz bandwidths enable data to be transferred. Resistivity from Drain to Source is 15Ohm for this electronic part. 2 outputs are included in the analogue multiplexer. It is capable of carrying out 2-bit operation. The series starts with Automotive, AEC-Q100.
1P1G3157QDBVRQ1 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 15Ohm
2-Bit
1P1G3157QDBVRQ1 Applications
There are a lot of Texas Instruments 1P1G3157QDBVRQ1 Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Automotive applications
- Audio and video routing
- Optical Applications
- Audio and video signal routing
- Audio/video switches
- Medical systems
- Medical Instrumentation
- Wireless Local Loop
- CSU