VND830E13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 60mOhm |
| Max Power Dissipation | 8.3W |
| Base Part Number | VND830 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 60m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830E13TR Overview
It is packaged in the manner of a Tape & Reel (TR).The 16-SOIC (0.295, 7.50mm Width) package contains it.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 2 outputs that are available for use.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It is a member of the VND830 family.For operation, 16 pins are used.In order to meet the operation criteria, the maximum output current drops to 6A.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 60mOhm ohms.It is part of the VIPower? series.This results in a 9A output current.In order to maximize efficiency, the supply voltage should be set at 36V.This LED driver can handle voltages up to 36V volts.Input voltage must be at least 5.5V volts.It requires 12μA current to operate.
VND830E13TR Features
Resistance of 60mOhm
VND830E13TR Applications
There are a lot of STMicroelectronics VND830E13TR Power Switches ICs applications.
- Smartphone and PDA
- Wearable Devices
- USB Power Distribution
- Wireless Modem Data Cards
- USB Ports/Hubs
- Low Voltage I/O System Power
- Set-top-box
- Notebook PC
- USB Protection
- Handheld Devices