TS393CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TS393 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 1.25W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 71 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 2nA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 71dB CMRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS393CN Overview
To facilitate transportation, it comes packaged in 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, Open-Drain output on this device.We ship the part through Tube .The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Speaking of types, this is a typical General Purpose comparator.This is a 2 element comparator.The pinout of the component starts from 8 pins it has.The recommended mounting method is Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.You may wish to search TS393 for more solutions that address your specific needs.There is a quiescent current of 25μA in this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 20μA .A supply current exceeding 20μA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.
TS393CN Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS393CN Applications
There are a lot of STMicroelectronics TS393CN linear comparators applications.
- General Purpose Low Voltage Applications
- Body Control Modules
- Lithium ion battery monitoring
- Industrial
- Hand-Held Electronics
- General-Purpose Portable Devices
- Wireless Base Stations
- Laptop Computers
- Limit Comparators
- Battery-Powered Electronics