TEMD5010X01
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SMD/SMT |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 215mW |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 130° |
| Forward Current | 50mA |
| Response Time | 100ns |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Rise Time | 100ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 100 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Wavelength | 940nm |
| Reverse Voltage (DC) | 60V |
| Dark Current | 2nA |
| Spectral Range | 430nm ~ 1100nm |
| Active Area | 7.5mm2 |
| Current - Dark (Typ) | 2nA |
| Height | 1.08mm |
| Length | 4.2mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TEMD5010X01 Overview
It is important to note that these photodiodes are packaged in Tape & Reel (TR) to prevent damage. It is necessary to enclose the photodiodes in SMD/SMT packages for safety purposes. When reverse-bias is applied continuously, the photodiodes are able to withstand only 60V voltage. A reverse-bias photodiode shouldn't exceed 60V continuously in reverse-bias mode. 2 is the number of pins on the photodiodes. The photodiodes could release 215mW heat within a circuit. During the operation of photodiodes, the temperature should not exceed 100°C. However, the minimum operating temperature for the photodiodes should be set to -40°C. Photodiodes should have a reverse anode voltage of 60V. It is generally recommended that the maximum heat released by photodiodes should be 215mW in a circuit. If the reverse voltage is 60V, the photodiodes can operate properly in the DC circuit. In order for current to flow across a photodiode, the voltage must be 1.3V. The photodiode operates at 2nA current even in the absence of light input.
TEMD5010X01 Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 430nm ~ 1100nm
Response Time: 100ns
Viewing Angle: 130°
TEMD5010X01 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD5010X01 Photodiodes applications.
- Shaft encoders
- Pure UV-C Monitoring
- Low Cost Light Monitoring
- Currency Validation
- Solar Cells
- Optical Switches
- Optical Analytics
- Pulse Oximetry
- Medical and Industrial
- Infrared remote control