TEMD1000
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SMD/SMT |
| Number of Pins | 2 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 75mW |
| Diode Type | PIN |
| Power Dissipation | 75mW |
| Viewing Angle | 30° |
| Forward Current | 50mA |
| Response Time | 4ns |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Rise Time | 4ns |
| Forward Voltage | 1V |
| Fall Time (Typ) | 4 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Wavelength | 940nm |
| Reverse Voltage (DC) | 60V |
| Dark Current | 1nA |
| Spectral Range | 790nm ~ 1050nm |
| Active Area | 0.23mm2 |
| Current - Dark (Typ) | 1nA |
| Responsivity @ nm | 0.55 A/W @ 950nm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TEMD1000 Overview
The photodiodes are packaged in the Tape & Reel (TR) to prevent damage. It is necessary to enclose the photodiodes in SMD/SMT packages for safety purposes. As long as the photodiodes are operated continuously in reverse-bias mode, the maximum voltage they can tolerate is 60V. When the photodiodes are reverse-biased, the voltage should never exceed 60V. A photodiode has a pin number of 2. There is a possibility that photodiodes could release 75mW heat within a circuit. During the operation of photodiodes, the temperature should not exceed 85°C. However, the photodiodes should be operated at a minimum temperature of -40°C. A reverse anode voltage of 60V should be applied to the photodiodes. Photodiodes generally release 75mW heat when connected in a circuit. DC photodiodes can work properly under reverse voltages of 60V in the DC circuit. Photodiodes are supposed to operate at 1V voltage. In the absence of light input, a photodiode produces a 1nA current.
TEMD1000 Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~85°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 790nm ~ 1050nm
Response Time: 4ns
Viewing Angle: 30°
Responsivity @ nm: 0.55 A/W @ 950nm
TEMD1000 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD1000 Photodiodes applications.
- Diode Laser Monitoring
- Machine Controls
- Optical Analytics
- LiDAR
- Photo interrupters
- Solar Cells
- Low Capacitance
- Vision Controls
- Position sensing
- Pure UV-C Monitoring