TC4404COA
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4404 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 40ns Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4404COA Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tube represents the package.The configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.For this device, the temperature range is 0°C~70°C TA.Inverting is the input type used in this program.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4404.Mosfet driver is mounted using Surface Mount.The pins are configured with 8 when designing the chip.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 1.5A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Using 470mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a precaution, make sure the supply current is kept at 4.5mA.In order to operate properly, the operating supply voltage should be set to 15V.
TC4404COA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4404COA Applications
There are a lot of Microchip Technology TC4404COA gate drivers applications.
- Smart Phones
- Solar power supplies
- Isolated Supplies for Motor Control
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
- Portable computers
- Broadcast equipment
- Digitally controlled power supplies
- High-speed communications
- RGB applications