TC4403CPA
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | TC4403 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 75 ns |
| Switch Type | General Purpose |
| Rise Time | 23ns |
| Fall Time (Typ) | 25 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~18V |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 2.8m Ω |
| High Side Driver | NO |
| Length | 9.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4403CPA Overview
As a result, it is packaged in the form of a Tube.It's included in the 8-DIP (0.300, 7.62mm) package.Through Hole is the mounting type of the LED driver.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to 0°C~70°C TA.There is a default setting of 2 for output.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.The TC4403 family consists of this type.It contains 8 terminations.During operation, the 8 pins are used.It consists of 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.It is mounted in the way of Through Hole.There are 8 pins in total on this board.This results in a 10mA output current.A self-contained LED driver with a capacity of MOSFET Drivers is contained in an econtainer.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 18V.There is a maximum current requirement of 2.5mA for its operation.
TC4403CPA Features
1 channels
TC4403CPA Applications
There are a lot of Microchip Technology TC4403CPA Power Switches ICs applications.
- Storage Drives
- Set-Top Boxes
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Notebook PC
- Handheld Devices
- Hot Swap
- Hard Disk Drives