STM32F303RET6
| Parameters | |
|---|---|
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 72MHz |
| Base Part Number | STM32F303 |
| Qualification Status | Not Qualified |
| Interface | CAN, I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 80K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 22x12b; D/A 2x12b |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Number of A/D Converters | 4 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 22 |
| Max Junction Temperature (Tj) | 105°C |
| Number of PWM Channels | 31 |
| Number of I2C Channels | 3 |
| Ambient Temperature Range High | 85°C |
| Number of USB Channels | 1 |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
STM32F303RET6 Description
The STM32F303RET6 is a 32-bit Microcontroller from the STM32 F3 series that includes the high-performance ARM Cortex-M4 RISC core with a floating point unit (FPU), high-speed embedded memories (Flash memory up to 512kB and 80kB of SRAM), and a wide range of enhanced I/Os and peripherals connected to two APB buses.
The STM32F303RET6 microcontroller includes fast 12-bit ADCs, seven comparators, four operational amplifiers, two DAC channels, ten general-purpose 16-bit timers, one general-purpose 32-bit timer, and standard and advanced communication interfaces, including three I2Cs, four SPIs, two I2Ss, three USARTs, two UART, a CAN, and a USB FS device.
STM32F303RET6 Features
CRC calculation unit
Power-on/Power-down reset (POR/PDR)
Programmable voltage detector (PVD)
Low-power modes - Sleep, stop, standby
VBAT supply for RTC and backup registers
4 to 32MHz Crystal oscillator
32kHz Oscillator for RTC with calibration
8MHz Internal RC with x 16 PLL option
40kHz Internal oscillator
Interconnect matrix
12-channel DMA Controller
2 x Watchdog timers (Independent and window)
SysTick Timer
Two 16-bit Basic timers to drive the DAC
Calendar RTC with alarm, periodic wakeup from Stop/Standby
CAN interface (2.0B Active)
USB 2.0 full speed interface
Infrared transmitter
Serial wire debug
96-bit Unique ID
STM32F303RET6 Applications
Data Acquisition
Low-cost Sensor integration
Low power Embedded devices.
Small data retention related purposes
The STM32F303RET6 is a 32-bit Microcontroller from the STM32 F3 series that includes the high-performance ARM Cortex-M4 RISC core with a floating point unit (FPU), high-speed embedded memories (Flash memory up to 512kB and 80kB of SRAM), and a wide range of enhanced I/Os and peripherals connected to two APB buses.
The STM32F303RET6 microcontroller includes fast 12-bit ADCs, seven comparators, four operational amplifiers, two DAC channels, ten general-purpose 16-bit timers, one general-purpose 32-bit timer, and standard and advanced communication interfaces, including three I2Cs, four SPIs, two I2Ss, three USARTs, two UART, a CAN, and a USB FS device.
STM32F303RET6 Features
CRC calculation unit
Power-on/Power-down reset (POR/PDR)
Programmable voltage detector (PVD)
Low-power modes - Sleep, stop, standby
VBAT supply for RTC and backup registers
4 to 32MHz Crystal oscillator
32kHz Oscillator for RTC with calibration
8MHz Internal RC with x 16 PLL option
40kHz Internal oscillator
Interconnect matrix
12-channel DMA Controller
2 x Watchdog timers (Independent and window)
SysTick Timer
Two 16-bit Basic timers to drive the DAC
Calendar RTC with alarm, periodic wakeup from Stop/Standby
CAN interface (2.0B Active)
USB 2.0 full speed interface
Infrared transmitter
Serial wire debug
96-bit Unique ID
STM32F303RET6 Applications
Data Acquisition
Low-cost Sensor integration
Low power Embedded devices.
Small data retention related purposes