SP619EK-L
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| Resistance | 377mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.2V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Max (Vsup) | 7V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SPST |
| Max Supply Current | 350μA |
| Turn On Delay Time | 55 ms |
| Switch-off Time-Max | 200ns |
| Length | 2.9mm |
| RoHS Status | RoHS Compliant |
SP619EK-L Overview
In the way voltage regulator is packaged, voltage regulator is in the form of a SOT-23-6.The 6 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.Computers or other communication constant current regulators have 6 pins, which are pronged contacts.There is a Surface Mount mounting bracket on the back of this current regulator.The supply voltage of this electrical constant current is 4.2V.In this power converter, SPST is an analog IC.Channels are becoming stronger/weaker based on the following statistics: 1.It is important that the supply voltage (Vsup) is greater than 2.5V.There is a point at which the maximal supply voltage (Vsup) provided for its operation reaches 7V.For high efficiency, keep the supply voltage at 5.5V.With its maximum supply current, 350μA offers maximum current regulator's design flexibility due to its maximal supply current.A maximum operating temperature of 85°C is used to ensure the reliability of the boost controller.The operating temperature should be greater than -40°C.With 1 output, it is configured.The resistance of the electrical dc to dc converter is 377mOhm (Ω).
SP619EK-L Features
The maximal operating temperature of 85°C to ensure its reliability.
1 output
SP619EK-L Applications
There are a lot of Exar Corporation SP619EK-L Current Regulation/Managements applications.
- Over-current measurement
- Over-current protection
- Level translating
- Programmable current source
- Over current monitor
- Diesel injection controls
- Smart battery packs
- Engine management
- Power supply current measurement
- Industrial applications current measurement