SN74LVC574APW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 21.6 ns |
| Quiescent Current | 1.5μA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574APW Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. Package Tubeembeds it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. In the operating environment, the temperature is -40°C~125°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74LVC series. It should not exceed 150MHzin terms of its output frequency. A total of 1elements are present in it. There is 10μA quiescent consumption. There are 20 terminations,This D latch belongs to the family of 74LVC574. An input voltage of 1.8Vpowers the D latch. This T flip flop has a capacitance of 4pF farads at the input. Electronic devices of this type belong to the LVC/LCX/Zfamily. Surface Mount mounts this electronic component. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number Bus Driver/Transceiver. The design is based on 8bits. Its superior flexibility is attributed to its use of 8 circuits. A D flip flop with 2embedded ports is available. The output current of 24mA makes it feature maximum design flexibility. It has 3lines. Quiescent current is consumed by the D latch in the amount of 1.5μA.
SN74LVC574APW Features
Tube package
74LVC series
20 pins
8 Bits
SN74LVC574APW Applications
There are a lot of Texas Instruments SN74LVC574APW Flip Flops applications.
- Cold spare funcion
- Shift Registers
- Divide a clock signal by 2 or 4
- High Performance Logic for test systems
- Shift registers
- Frequency Dividers
- Asynchronous counter
- Data Synchronizers
- Set-reset capability
- Guaranteed simultaneous switching noise level