SN74LVC373AZQNR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1mm |
| Length | 4mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC373AZQNR Overview
There is an embedded version of it in package 20-VFBGA. It is packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74LVC family. 8 Bits are used in the design of this electronic part. This device has 20 terminations. This type belongs to the 74LVC373 family. A 1.8V voltage supply is required for operation. It has 20 pins that makes it easy to use. It is a member of the LVC/LCX/Z family of electronic devices. The device has 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. A total of 3.3V power supplies are needed to run it. An electronic circuit can be found on 8 input lines. The reliability of this device makes it well suited to TR. It features maximum flexibility in design due to 24mA output current.
SN74LVC373AZQNR Features
20-VFBGA package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373AZQNR Applications
There are a lot of Texas Instruments SN74LVC373AZQNR Latches applications.
- Parallel Output
- Automotive Infotainment
- Avionics
- Shift left register
- Automotive HEV/EV Powertrain
- BCD counting
- Double bus register system
- High-speed logic
- Serial Output Data Queuing
- Parallel data synchronization