SN74LVC2G80DCUR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.1 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.005mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G80DCUR Overview
The flip flop is packaged in a case of 8-VFSOP (0.091, 2.30mm Width). It is contained within the Tape & Reel (TR)package. There is a Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. Temperature is set to -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74LVC series. It should not exceed 160MHzin terms of its output frequency. As a result, it consumes 5μA of quiescent current without being affected by external factors. Currently, there are 8 terminations. This D latch belongs to the family of 74LVC2G80. A voltage of 1.8V is used to power it. There is 3.5pF input capacitance for this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 8 pins. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latch. As soon as 5.5Vis reached, Vsup reaches its maximum value. The superior flexibility of this product is achieved by using 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The D latch runs on a voltage of 3.3V volts. It operates with 1 output lines.
SN74LVC2G80DCUR Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G80DCUR Applications
There are a lot of Texas Instruments SN74LVC2G80DCUR Flip Flops applications.
- Buffered Clock
- Memory
- Data Synchronizers
- Computing
- Safety Clamp
- Individual Asynchronous Resets
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch
- Latch-up performance
- Registers