SN74LVC1G79DCKT
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
SN74LVC1G79DCKT Overview
The flip flop is packaged in a case of 5-TSSOP, SC-70-5, SOT-353. You can find it in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. A temperature of -40°C~125°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74LVC series. You should not exceed 160MHzin its output frequency. T flip flop consumes 10μA quiescent energy. It has been determined that there have been 5 terminations. The 74LVC1G79 family contains it. An input voltage of 1.8Vpowers the D latch. Its input capacitance is 4pFfarads. It is a member of the LVC/LCX/Zfamily of D flip flop. It is mounted by the way of Surface Mount. This board has 5 pins. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. This flip flop is designed with 1 Bits. Using 1 circuits, it is highly flexible. As a result of its reliability, this D flip flop is ideally suited for TR. It runs on 3.3Vvolts of power. It offers maximum design flexibility with its output current of 32mA.
SN74LVC1G79DCKT Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DCKT Applications
There are a lot of Texas Instruments SN74LVC1G79DCKT Flip Flops applications.
- Asynchronous counter
- High Performance Logic for test systems
- Control circuits
- Frequency division
- Test & Measurement
- Single Down Count-Control Line
- Synchronous counter
- Computing
- Differential Individual
- Common Clocks