SN74LV595ARGYR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LV595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 25.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV595ARGYR Overview
In package 16-VFQFN Exposed Pad, there is an embedded device. 16 is the total number of terminations on the chip. Cut Tape (CT) is the case in which it is packed. The part's operating supply voltage is rated 2.5V. 1 elements make up this part. It has 16 pins. Using Surface Mount as a mount point is recommended. The electronic component belongs to the LV/LV-A/LVX/H. Mounting of this component is indicated by Surface Mount. There is a range of operating temperatures -40°C~85°C. There is a votage of 2V~5.5V provided with it. The 74LV series contains this electrical component. Similar parts can be found using the 74LV595 family. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. This part should have a minimum supply voltage (Vsup) of at least 2V. A voltage of 3.3V is possible with this device. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. The number of output lines to be operated is 9. A quiescent current of 20μA is used to run the device. There is a TR packaging for the part.
SN74LV595ARGYR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
It supplies 3.3V power
With 9 output lines
Quiescent Current at 20μA
Packing Method : TR
SN74LV595ARGYR Applications
There are a lot of Texas Instruments SN74LV595ARGYR Shift Registers applications.
- Serial-to-parallel data conversion
- store data in digital form
- data transfer
- Remote control holding register
- Cache memory in CPU
- Interconnectors
- Sequence generator
- Parallel to serial converter
- LED matrix control
- ROM Chips