SN74LV595APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV595APWRG4 Overview
In package 16-TSSOP (0.173, 4.40mm Width), there is an embedded device. 16 is the sum of the number of terminations in the chip. Presented in a case of Tape & Reel (TR). Parts with a 2.5V operating supply voltage are specified. On this part, there are 1 elements. It is equipped with a pin count of 16. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of LV/LV-A/LVX/H. Mounting of this component is indicated by Surface Mount. Operating temperatures are within the range of -40°C~85°C. During operation, the voltage is within the range of 2V~5.5V. It is part of the 74LV series of electrical components. If you use the 74LV595 family, you can find parts that are similar. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, Vsup should not be less than 2V. Voltage can be delivered at 3.3V by the device. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. The number of output lines to be operated is 9. There is a TR package for the part.
SN74LV595APWRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
It supplies 3.3V power
With 9 output lines
Packing Method : TR
SN74LV595APWRG4 Applications
There are a lot of Texas Instruments SN74LV595APWRG4 Shift Registers applications.
- Flash Memory
- Data Format Converters
- Serial-to-parallel data conversion
- 7-segment display control
- Remote control holding register
- LED matrix control
- Generate time delay toward digital circuits
- Interconnectors
- Parallel to serial converter
- Cache memory in CPU